Product ID:V-724;POLY DIMETHYL SILOXANE
MSDS Date:07/12/1989
FSC:6850
NIIN:00-295-7685
MSDS Number: BJFNT

Emergency Phone: 518-283-5963

Info Phone: 518-283-5963

Preparer: JASON E. BARNES

Cage: 64101

Telephone: 800-423-9993

Cage: 64101

DIMETHYLPOLYSILOXANE

OTHER COMPONENTS (TYPE NOT SPECIFIED)

LD50 LC50 Mixture:NONE NOTED
Routes of Entry: Inhalation:NO Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Effects of Overexposure:EYE:TEMPORARY EYE IRRITATION - AVOID HANDLING
MATERIAL AND RUBBING EYES.
Medical Cond Aggravated by Exposure:NONE STATED

First Aid:INHALATION: REMOVE TO FRESH AIR. EYE: FLUSH WITH WATER FOR 15
MINUTES WHILE HOLDING EYELIDS OPEN. GET MEDICAL ATTENTION. SKIN:
WASH WITH SOAP AND WATER. REMOVE CONTAMINATED CLOTHING. IF
IRRITATION PER SISTS, GET MEDICAL ATTENTION. INGESTION: DO NOT
INDUCE VOMITING. IN GENERAL, NO TREATMENT IS REQUIRED. GET MEDICAL
ADVICE.

Flash Point Method:COC
Flash Point:>500F,>260C
Extinguishing Media:USE WATER FOG, CARBON DIOXIDE, FOAM, OR DRY
CHEMICAL.
Fire Fighting Procedures:WEAR FIRE FIGHTING PROTECTIVE EQUIPMENT AND A
FULL FACED SELF CONTAINED BREATHING APPARATUS. EVACUATE AREA. COOL
FIRE EXPOSED CONTAINERS WITH WATER SPRAY.
Unusual Fire/Explosion Hazard:NONE KNOWN

Spill Release Procedures:SCRAPE UP BULK - REMOVE FILM WITH ABSORBENT
MATERIAL AND/OR HYDROPHOBIC SOLVENT. IF SOLVENT USED, OBSERVE ALL
HANDLING PROCEDURES FOR SOLVENT.
Neutralizing Agent:NONE

Handling and Storage Precautions:STORAGE- BE NEAT. CAN CAUSE SLIPPERY
CONDITIONS. OTHERWISE NORMAL STORAGE.
Other Precautions:NONE KNOWN

Respiratory Protection:NONE REQUIRED
Ventilation:NONE REQUIRED
Protective Gloves:RUBBER
Eye Protection:SAFETY GLASSES
Other Protective Equipment:EYE WASH
Work Hygienic Practices:USE GOOD CHEMICAL HYGIENE PRACTICE. AVOID
UNNECESSARY CONTACT.
Supplemental Safety and Health
NONE NORMALLY REQUIRED.

HCC:N1
Spec Gravity:1.03
Solubility in Water:NEGLIGIBLE
Appearance and Odor:TRANSLUCENT-LIGHT WHITE PASTE- LITTLE OR NO ODOR
Percent Volatiles by Volume:<2

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS, STRONG ACIDS AND BASES
Stability Condition to Avoid:TEMPERATURE OVER 550F
Hazardous Decomposition Products:CARBON MONOXIDE, CARBON DIOXIDE, SIO2,
DUST

Waste Disposal Methods:DISPOSE I/A/W ALL FEDERAL, STATE AND LOCAL
REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.